How to clean a carpet with water?

It is true that carpet makes our house shiny. And also it is simple to get a carpet dirty over time.  Water can help you to clean your carpet like a new one, nice and fresh again. In today’s article, I will walk you through the steps to wash your carpet with water, so you have a clean and shiny floor.

Step 1: Gather Your Supplies

Before landing in this process, you should have all the necessary components on hand:

  • Vacuum cleaner
  • Carpet cleaning solution or detergent
  • Hot water
  • Carpet cleaning machine (optional)
  • Scrub brush or mop
  • Towels or rags
  • Bucket

Step 2: Prepare the Area

Start by removing furniture and any other obstacles from the carpeted area. This step allows for unobstructed cleaning and ensures that every inch of the carpet gets attention.

Step 3: Vacuum Thoroughly

Use a vacuum cleaner with a suitable attachment to thoroughly vacuum the carpet. This step helps remove loose dirt, dust, and debris, making the cleaning process more effective.

Step 4: Spot Test

Before applying any cleaning solution to the entire carpet, it’s crucial to perform a spot test. Choose an inconspicuous area of the carpet and test the cleaning solution to ensure it doesn’t cause color fading or damage to the fibers.

Step 5: Mix the Cleaning Solution

If you’re using a carpet cleaning machine, follow the manufacturer’s instructions for mixing the cleaning solution with hot water. If not, mix the detergent with hot water in a bucket according to the product’s label instructions. Ensure the solution is well-dissolved.

Step 6: Apply the Cleaning Solution

There are two primary methods for applying the cleaning solution:

Using a Carpet Cleaning Machine: If you have access to a carpet cleaning machine, fill the machine’s reservoir with the prepared cleaning solution. Follow the machine’s instructions for application and use.

Manual Application: If you don’t have a carpet cleaning machine, use a scrub brush or mop to apply the cleaning solution evenly across the carpet’s surface. Work in small sections to ensure thorough coverage.

Step 7: Scrub and Agitate

To loosen dirt and stains, gently scrub the carpet with a scrub brush or use the mop to agitate the cleaning solution. Pay extra attention to heavily soiled or stained areas. Allow the cleaning solution to sit on the carpet for a few minutes to break down stains.

Step 8: Rinse

If you’re using a carpet cleaning machine, follow up with a rinse cycle using clean, hot water. If you’re manually cleaning, rinse the carpet by mopping it with clean water. Ensure that you remove all traces of the cleaning solution to prevent residue buildup.

Step 9: Drying

Proper drying is crucial to prevent mold and mildew growth. Open windows and use fans or dehumidifiers to expedite the drying process. Blot any excess moisture with towels or rags. Ensure the carpet is completely dry before moving furniture back in.

Step 10: Replace Furniture

Once the carpet is thoroughly dry, return the furniture and any other items you removed during the cleaning process.


You can follow this guide to clean your own carpet without hiring an expert cleaner. But if you don’t have enough time to do it, just call us or book a service to fulfill your needs.

Leave a Reply